我们最常见的颜色有艳绿、蓝色等,但是,不乏其他甲方因为特殊环境而选择其他颜色。我们最直观看到的颜色是面涂层的颜色,好的盐城环氧地坪,颜色鲜亮纯正,没有色差。但是,在实际的施工中,我们会发现,表面出现了色差。关于色差出现的原因以及控制方法,下面我们来了解一下!
一、色差产生的原因:
1. Reasons for the color difference of epoxy flooring:
1、主剂和配料未搅拌均匀。环氧树脂面漆颜料发生沉淀,使用时没有搅拌均匀,导致施工后存在色差。
1. The main ingredients and ingredients are not stirred evenly. Sedimentation of epoxy resin topcoat pigments and uneven mixing in use result in color difference after construction of epoxy floor.
2、施工的不连续性导致。施工中一次配料过多,在施工容器里的面漆液体材料在阳光下暴晒。因为环氧面漆在温度严重不均衡的情况下会发生一定的化学反应和挥发,造成浓度发生变化。所以在涂抹时会和之前的颜色有差别。
2. The discontinuity of construction results. During the construction, there are too many ingredients at one time, and the topcoat liquid material in the construction container is exposed to the sun. Because the epoxy flooring varnish will undergo certain chemical reactions and volatilization in the case of serious temperature imbalance, resulting in changes in concentration. So there is a difference in color when applied.
3、购的环氧材料批次不同。有一些面积较大的工程中,施工队没有将材料一次性采购到位,有些分好几个批次购买,这就导致不同批次的面漆有色彩差异,在施工后就会发现面涂有色差。
3. Different batches of epoxy flooring materials were purchased. In some large-scale epoxy flooring projects, the construction team did not purchase epoxy flooring materials in place at one time, and some were purchased in several batches, which led to different batches of epoxy flooring paints with different colours. After the construction, it will be found that there are colour differences on the flooring surface.
二、预防产生色差的方法:
2. The methods of preventing colour aberration of epoxy flooring:
1、环氧面漆在使用时一定要严格按照配比充分搅拌均匀,然后再使用。
1. When using epoxy topcoat, it must be stirred uniformly according to the proportion strictly, and then used.
2、环氧地坪施工时要坚持施工的连续性,并且要根据实际情况进行环氧地坪面漆的调配,保证用多少调配多少,这样既保证不浪费材料,还解决了色差问题。
2. In the construction of epoxy flooring, we should adhere to the continuity of construction, and make sure that the amount of epoxy flooring topcoat is adjusted according to the actual situation, so as not to waste materials, but also to solve the problem of chromatic aberration.
3、在采购环氧地坪材料的时候尽量采购同一批次的,并且尽量一次将材料采购完,如果采购了不同批次的材料,要把每个批次的材料独立放在一个区域,然后在施工使用时,一个区域的用同一批次的,这样就是面漆颜色有略微差异也不会影响工程的整体质量。
3. When purchasing epoxy flooring materials, try to purchase the same batch, and try to finish the material purchasing at one time. If purchasing different batches of materials, the materials of each batch should be placed in an area independently, and then when using in construction, the same batch of materials will be used in one area, which means that the color of topcoat is slightly slight. Differences will not affect the overall quality of the project.
三、环氧地坪出现色差处理办法:
3. Treatment of color difference on epoxy flooring:
如果已经出现了色差,最简单的办法就是重新滚涂一遍面漆。
环氧地坪施工后表面涂层发白干燥的原因盐城环氧地坪 环氧地坪施工磨穿特征用砂纸砂磨时,将涂膜片面砂穿,甚而连成品表面色泽层都被砂掉了。发生缘故采用的砂纸太粗;砂磨时使劲过猛;防腐地坪磨水砂时未加胰子水。预防措施采用砂纸粗细要妥当;砂磨时使劲不宜过大,独特关注砂磨棱角边际处使劲要轻;磨水砂应加胰子水。修补方式对成品表面色泽层被砂掉处须从头补色、… 环氧地坪夏季施工为什么容易出现色差?盐城环氧地坪 环氧地坪漆以耐磨,抗压,防尘防潮,地表清理方便,表明光泽持久等著称,漆膜坚韧,耐磨性好,施工安全省心,在实验室,停车场,工程地坪,办公楼,医院,车间等场合都被广泛使用。 炎热的夏季进行盐城环氧地坪施工总会遇到各种各样的问题,比如地面色差和接茬影响地面美观性。今天上海诚镭和大家分享为什么环氧地…推荐新闻
在盐城环氧地坪施工时要注意哪些问题?
环氧地坪有着面光滑、美观,面层如采用自流平工艺可达镜面效果,如采用平涂工艺可有效遮蔽地面平整度差的缺陷的特点…
地下室车库地坪出现渗漏起皮3个原因和处理…
现在大多停车场和购物超市都建在地下,节省空间的同时也方便了人们的生活,但是随着使用时间的延长,地下室车库地坪…
在盐城环氧地坪施工前期准备什么及施工质量…
大部分环氧地坪漆的做法是使用环氧树脂以及固化剂再加入定量的颜料、填料等进行施工处理出来的,环氧地坪具备抗压、…
环氧地坪施工前对基层缺陷的处理方法
针对环氧地坪漆施工前,基层缺陷的处理方式。一个高质量的无锡环氧地坪受多种因素影响。其中就有地面基层,基层的好…
如何防止环氧地坪施工中出现咬底?
盐城环氧地坪漆漆膜起皱多数是涂料快干造成的。施工环境温度高,涂装距离(喷涂)大,稀释剂挥发快,致使地坪漆漆膜…
在盐城选购环氧地坪施工怎么做到质量与性价…
我们总是站在客户的角度去思考,如果基础底面过差,用哪个地坪产品更能实现好的效果,盐城环氧地坪薄涂还是自流平,…
有可能造成环氧地坪漆缩孔的施工原因如下
在工业地坪获得广泛应用的基础上,随着人们生活水平的不断提高,现已在家庭装潢中得以推广应用。盐城环氧地坪已成…
浅析环氧自流平地坪与环氧薄涂型地坪不一样…
环氧自流平地坪是指选用环氧树脂、固化剂、助剂、颜料、填料等涂料依照规则的配比在现场直接配比后选用自流平施工技…
国内外自流平涂料的区别及自流平漆的施工
环氧自流平漆的基本材料包括环氧树脂、固化剂、活性稀释剂、添加剂、填料和颜料。这是一种无溶剂地板漆。其特点是功…
环氧地坪漆的好坏直接决定地坪的质量
盐城环氧地坪漆的好坏直接决议地坪的质量 对地坪行业的水仍是挺深的,今日由我们十五年经验的老地坪专家为您剖析一…









管理员
该内容暂无评论